Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Drolet DB04900 Cape Town 1800 30 3/4 Inch Free Standing Cast Iron Wood Stove at KBA Home Studio
This product ad may change over time
ShareDrolet DB04900 Cape Town 1800 30 3/4 Inch Free Standing Cast Iron Wood Stove at KBA Home Studio
Drolet DB04900 Cape Town 1800 30 3/4 Inch Free Standing Cast Iron Wood Stove Entirely made of cast iron, the Cape Town 1800 is ideal for heating up to 2000 ft² with its 75,000 BTU/h of maximum power. Certified at 1.8 g/h, this non-catalytic unit is the only Drolet model to offer a flue outlet at the back and on the top of the stove. The Cape Town 180…
Drolet DB04900 Cape Town 1800 30 3/4 Inch Free Standing Cast Iron Wood Stove Entirely made of cast iron, the Cape Town 1800 is ideal for heating up to 2000 ft² with its 75,000 BTU/h of maximum power. Certified at 1.8 g/h, this non-catalytic unit is the only Drolet model to offer a flue outlet at the back and on the top of the stove. The Cape Town 1800 has a large viewing area as well as a full width andiron to hold logs during loading. Its classic design and distinguished cast iron finish give it all its charm. Features: Up to 8 hours burn time Heavy duty 3/8 Inch steel top Proudly made in Canada Certified for Mobile Home and alcove installation Average Particulate Emissions Rate: This appliance is officially tested and certified by an independent agency Values are as measured per test method, except for the Recommended Heating Area, firebox volume, Maximum Burn Time and maximum heat output As measured per CSA B415.1-10 stack loss method Higher Heating Value of the fuel Lower Heating Value of the fuel Performances based on a fuel load prescribed by the standard at 7 lbs/ft³ and with a moisture content between 19% and 25% Optimum Overall Efficiency at a specific burn rate (LHV) Carbon monoxide Recommended Heating Area: Recommended Heating Area and Maximum Burn Time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel Type and other variables. The Recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure Maximum heat output-Dry Cordwood: The maximum heat output (Dry Cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lbs/ft³ and 12 lb/ft³. The moisture content is between 19% and 25% Optimum Heat Transfer Efficiency: The Optimum Heat Transfer Efficiency is for the low burn rate (using HHV) and represents the appliances ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion Included - Ash drawer, ceramic glass, ash lip, broad-spectrum air damper Limited lifetime warranty Specifications: Fuel Type: Dry Cordwood (16 Inch Recommended) Recommended Heating Area: 500 ft² - 2,000 ft² Overall Firebox Volume: 2 ft³ EPA Loading Volume: 1.55 ft³ Maximum Burn Time: 8 Hours Maximum Heat Output-Dry Cordwood: 75,000 BTU/h (22 kW) Overall Heat Output Rate: 13,784 BTU/h (4.04 kW) - 57,684 BTU/h (16.91 kW) Average Overall Efficiency (Dry Cordwood): 71% (HHV) Average Overall Efficiency (Dry Cordwood): 76% (LHV) Optimum Overall Efficiency: 78% Optimum Heat Transfer Efficiency: 77% Average Particulate Emissions Rate: 1.8 g/h Average CO: 120 g/h Combustion Technology: Non-Catalytic High-Efficiency Certified Appliance: CSA B415.1-10 Log Positioning: Loading Over Width Type of Chimney: CAN/ULC S629, UL 103 HT (2100 °F) Baffle Type: High Quality Vermiculite Approved for an Alcove Installation: Yes Door Type: Single, Glass with Cast Iron Frame Glass Type: Ceramic Glass air-wash system: Yes Moulded refractory bricks: Yes Model: Legs Dimensions: Overall Width: 30 3/4 Inch Overall Depth: 22 5/8 Inch Overall Height: 32 5/8 Inch Door Opening Height: 9 1/2 Inch Door Opening Width: 22 Inch Firebox Height: 9 1/2 Inch Firebox Width: 21 7/8 Inch Firebox Depth: 13 1/4 Inch Chimney Diameter: 6 Inch Flue Outlet Diameter: 6 Inch Maximum Log Length: 21 Inch Minimum Chimney Height: 12 Feet Glass surface Width: 20 1/2 Inch Glass surface Height: 12 Inch Codes and Standards: USA standard (Emissions): EPA Canadian Standard (Emissions): CSA B415.1-10 USA Standard (safety): UL 1482 Canadian Standard (safety): ULC S627 Tested and Listed as Per Applicable Standards: By an Accredited Laboratory (CAN/USA)
Description
Drolet DB04900 Cape Town 1800 30 3/4 Inch Free Standing Cast Iron Wood Stove Entirely made of cast iron, the Cape Town 1800 is ideal for heating up to 2000 ft² with its 75,000 BTU/h of maximum power. Certified at 1.8 g/h, this non-catalytic unit is the only Drolet model to offer a flue outlet at the back and on the top of the stove. The Cape Town 1800 has a large viewing area as well as a full width andiron to hold logs during loading. Its classic design and distinguished cast iron finish give it all its charm. Features: Up to 8 hours burn time Heavy duty 3/8 Inch steel top Proudly made in Canada Certified for Mobile Home and alcove installation Average Particulate Emissions Rate: This appliance is officially tested and certified by an independent agency Values are as measured per test method, except for the Recommended Heating Area, firebox volume, Maximum Burn Time and maximum heat output As measured per CSA B415.1-10 stack loss method Higher Heating Value of the fuel Lower Heating Value of the fuel Performances based on a fuel load prescribed by the standard at 7 lbs/ft³ and with a moisture content between 19% and 25% Optimum Overall Efficiency at a specific burn rate (LHV) Carbon monoxide Recommended Heating Area: Recommended Heating Area and Maximum Burn Time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel Type and other variables. The Recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure Maximum heat output-Dry Cordwood: The maximum heat output (Dry Cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lbs/ft³ and 12 lb/ft³. The moisture content is between 19% and 25% Optimum Heat Transfer Efficiency: The Optimum Heat Transfer Efficiency is for the low burn rate (using HHV) and represents the appliances ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion Included - Ash drawer, ceramic glass, ash lip, broad-spectrum air damper Limited lifetime warranty Specifications: Fuel Type: Dry Cordwood (16 Inch Recommended) Recommended Heating Area: 500 ft² - 2,000 ft² Overall Firebox Volume: 2 ft³ EPA Loading Volume: 1.55 ft³ Maximum Burn Time: 8 Hours Maximum Heat Output-Dry Cordwood: 75,000 BTU/h (22 kW) Overall Heat Output Rate: 13,784 BTU/h (4.04 kW) - 57,684 BTU/h (16.91 kW) Average Overall Efficiency (Dry Cordwood): 71% (HHV) Average Overall Efficiency (Dry Cordwood): 76% (LHV) Optimum Overall Efficiency: 78% Optimum Heat Transfer Efficiency: 77% Average Particulate Emissions Rate: 1.8 g/h Average CO: 120 g/h Combustion Technology: Non-Catalytic High-Efficiency Certified Appliance: CSA B415.1-10 Log Positioning: Loading Over Width Type of Chimney: CAN/ULC S629, UL 103 HT (2100 °F) Baffle Type: High Quality Vermiculite Approved for an Alcove Installation: Yes Door Type: Single, Glass with Cast Iron Frame Glass Type: Ceramic Glass air-wash system: Yes Moulded refractory bricks: Yes Model: Legs Dimensions: Overall Width: 30 3/4 Inch Overall Depth: 22 5/8 Inch Overall Height: 32 5/8 Inch Door Opening Height: 9 1/2 Inch Door Opening Width: 22 Inch Firebox Height: 9 1/2 Inch Firebox Width: 21 7/8 Inch Firebox Depth: 13 1/4 Inch Chimney Diameter: 6 Inch Flue Outlet Diameter: 6 Inch Maximum Log Length: 21 Inch Minimum Chimney Height: 12 Feet Glass surface Width: 20 1/2 Inch Glass surface Height: 12 Inch Codes and Standards: USA standard (Emissions): EPA Canadian Standard (Emissions): CSA B415.1-10 USA Standard (safety): UL 1482 Canadian Standard (safety): ULC S627 Tested and Listed as Per Applicable Standards: By an Accredited Laboratory (CAN/USA)